Anabeeb Pipes

Our ANABEEB GRP Pipes manufacturing facility situated in Al Mafraq, Abu Dhabi was established and commissioned in May 1996
We manufacture Centrifugally Cast (CC) Glass fiber Reinforced Polyester (GRP) pipes which are ideally suited for nearly all corrosive piping applications.

ANABEEB manufacture various GRP products and therein offer a complete package for integrated sewerage/drainage system solutions.

CC GRP pipes& fittings

ANABEEB CC-GRP pipe system qualities of high strength combined with flexibility and corrosion resistance make it very attractive for use in numerous applications, including water supply, sea water intake, sewage, drainage, transportation of slurries and industrial effluent.

Our products for gravity and pressure applications are available in a wide range of diameters. We have been producing CC GRP Pipes in the range between nominal diameters of 200mm to 2000mm of standard length 6 m for various combinations of pressure classes PN 1 to PN 24 and stiffness class from SN 2,500 to SN 1,000,000. ANABEEB pipes & fittings are licensed by British Standards Institution (BSI) to put Kite mark.

  • Gravity drainage pipes – Manufactured in accordance with (BS/DIN) EN14364 & ISO 10467 standards. Mainly used for Sewer, Storm water drainage, sea water and industrial effluent applications.
  • Pressure pipes – Manufactured in accordance with (BS/DIN) EN14364 & EN1796, ISO 10639 & ISO 10467 standards. Mainly used for Potable water supply, pressure mains of Sewer/ effluent /raw water/seawater drainage and STP/ETP pipelines. It is WRAS approved for use in potable water.
  • Duct pipes – Manufactured in accordance with (BS/DIN) EN14364 & ISO 10467 standards. Mainly used for Road crossing, odour control ducts and Sleeve ducts.
  • Manholes and fittings – Manufactured in accordance with (BS/DIN) EN14364 & ISO25780. Best suited for Trenchless application by Micro-tunneling.

GRP Structural Chambers and Manholes

ANABEEB has pioneered the ‘Solid GRP Structural Chamber and Manhole System’ in U. A.E. that holds phenomenal benefits for contractors, consultants, clients and operating authorities alike due to assured quality & long life, speed of erection/installation, elimination of various activities associated with conventional system.

  • GRP Chambers – Manufactured in accordance with (BS/DIN) EN 15383 & EN 476 using CC GRP shafts. Manly used with sewerage and storm water drainage system. Also suitable as valve chambers.
  • GRP Manholes – Manufactured in accordance with (BS/DIN) EN 15383 & EN 476 using CC GRP shafts. Used for sewerage and storm water drainage. Manly used with sewerage and storm water drainage system. Also suitable as deep valve chambers.

GRP Holding tanks

GRP holding tanks are manufactured to the customer requirement. Modular construction is also possible on customer request.

Other GRP Products

ANABEEB also produce other miscellaneous GRP preformed products like GRP ladders, GRP liner, Enclosures.

PVC pipes:

Our PVC pipes are manufactured in Anabeeb pipes facility in Mussafah. Emirates of Abu Dhabi. We produce both U-PVC (unplasticized polyvinyl chloride) pipes for use in infrastructure projects and LD-PE (low density polyethylene) pipes for irrigation applications.

U-PVC pipes are available in metric dimensions that are produced according to international standards. pipe size ranging from 20 mm to 500 mm with different nominal pressures (PN) are available in a standard length of 6 meters; however, other lengths and wall thickness can be produced upon request. U-PVC pipes are suitable for pressure pipeline systems for cold water services, sewage mains, fire ring mains, non-pressure applications, telecommunications ducts and cable conduits. They are available in solvent weld socket joints as well as rubber ring socket joints. Slotted pipes, bends and couplers are also manufactured.

ANABEEB has quality systems, which are, designed to satisfy the exacting requirements of the ISO 9001/9002 Standard. Each pipe manufactured by computer controlled production process is marked with unique number that permits complete traceability of the product with respect to the origin and quality of the raw materials, the manufacturing conditions and conformance test results, Even before the pipe is produced, QA approved raw materials are tested in the laboratory in order to insure that they meet the standards.

PVC pipe production is in accordance with ISO 4422-2, BS EN 14252 & 1401 and ISO 4435.