Concrete Products

Arkan’s portfolio of concrete products ranges from regular blocks used for construction of villas, buildings, and retaining walls to high end architectural pavers for landscaping with varied finishes of colours and shapes. Our dry mortar mixes complement our product range with more than 120 textures and colours to satisfy the most demanding architects.

Our products have been showcased in prestigious projects throughout the Emirate of Abu Dhabi.

Our concrete blocks are produced at Emirates Blocks Factories in four facilities located in Abu Dhabi and Al Ain, with a total capacity of 235 thousand blocks/day, while our dry mortar facility is strategically located at Al Mafraq to serve both Abu Dhabi city and Al Ain. Our large format architectural pavers are manufactured in Al Ain.

At Emirates Block we provide a range of benefits and solutions to our customers through our extensive and diverse range of quality concert block. Our state-of-the-art manufacturing facility is based on German Technology from “MASA” and “HESS”. We are the Emirates’ Leading manufacturer of concrete blocks and meet international specification for technology, quality, services and the environment. Our portfolio of products is manufactured at three locations in Al Mafraq and Al Ain.

Building Blocks:

Masonry (Hollow Blocks)

Concrete Hollow Building Blocks are produced according to BS 6073, part1 . These hollow blocks are widely used for building infrastructure & require low maintenance. EBF hollow blocks are produced in all standard sizes & shapes according to customer requirements in OPC & SRC construction, which are greater than or equal to 7.5N/mm2 in accordance with BS 6073

Masonry (Solid Blocks)

Concrete Solid Masonry Blocks are produced according to BS6073, part 1. These solid blocks are commonly used for foundation of structures. EBF solid blocks are produced in all standard sizes & shapes according to customer requirements in OPC & SRC construction, which greater than or equal to 12.5N/mm2 in accordance with BS 6073

Masonry (Thermo Blocks)

Low U value indicates the efficiency of thermo block in preventing heat transfer between the two sides. EBF thermo blocks are produced in all standard sizes& shapes according to customer requirement in OPC construction which are of 6.0N/mm2 – 7.5N/mm2 in accordance with BS 6073.

Building (Hourdi Blocks)

Concrete Hourdi Masonry Blocks are produced according to BS 6073, part1. These hourdi blocks are used slab floor concrete. EBF hourdi blocks are produced in all standard sizes & shapes according to customer requirement in OPC construction, which are 5.0N/mm2 – 7.0N/mm2 in accordance with BS 6073.

Pavers

Emirates Block’s manufactures an extensive range of concrete pavers with various textures and colors to match your outdoor decor. These blocks are available in different color combinations and textures thereby developing the natural beauty of your ambience.

Emirates Block’s paving stones are multipurpose, appealing and artistically crafted to meet the demand of any type of landscape construction and design. Emirates Block’s paving comply with BS 6717 & ASTM C 140.

Inter Locking Paving – Uni

EBF uni pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2; it is the best choice for areas with vehicular traffic and walkways. One of the first paver shapes ever designed. Although often used for heavy-duty applications, UNI-Block is equally attractive in commercial, municipal, and residential settings.

Inter Locking Paving – Rectangular

EBF rectangular pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2; it is the best choice for areas with vehicular traffic and walkways. With its simple shape and utilitarian appeal, Rectangular stone is a practical choice for a variety of residential and commercial installations. Basic in form; its clean, modular shape makes possible a myriad of applications.

Inter Locking Paving – Vario
Quadro Pavers

EBF Quadro pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2.

Octagonal Pavers

EBF Octagonal pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2.

Cube Pavers

EBF Cube pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2.

Inter Locking Paving – Marbella
Trapazoid & Big Square

This system consists of two individual tiles – the big square and the trapez. With its innovative design and colour combinations this system creates a Three dimensional appearance. EBF marbella pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2 .

Inter Locking Paving – La Plaza
Bishop Hat & Big Square

EBF La plaza pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2.

Inter Locking Paving – Monaco
Rhombus & Big Square

EBF Monaco pavers are produced in accordance with BS 6717, having an average compressive strength of 49- 56 N/mm2; These pavers are the choice of adnoc petrol stations & restrooms.

Dry Mortar

Cement plaster/render for concrete blocks- Arkan-200:

Dry mix plaster consisting of OPC, hydrated lime polymer additives and processed mineral aggregate (1.25mm). Applied with machine on concrete blocks and concrete background on interiors and exteriors. Suitable for plastering/ rendering of normal concrete blocks and concrete background. Easy to apply by machine or by hand Excellent workability Thickness 10-25 mm in single coat Compressive strength 4-5N/mm2.

Cement plaster/render for AAC blocks- Arkan 205:

Dry mix plaster consisting of OPC, hydrated lime polymer additives and processed mineral aggregate (1.25mm). Applied with machine on AAC lightweight blocks on interiors and exteriors. Applied on AAC blocks in single/double coats depending on the thickness. Total thickness 10-25mm in two coats Easy to apply by machine or by hand Excellent workability Compressive strength 3-4 N/mm4.

Cement veneer plaster for ceilings (thin coat plaster)- Arkan 210:

Dry mix fine plaster consisting of OPC, hydrated lime polymer additives and processed mineral aggregate (0.5mm). Applied with machine or manually. Finishing coat plaster for ceilings and rough plaster surfaces in thin coat Applied on in 3-5 mm thickness can be sprayed with plastering machine or applied manually.

Easy to work with trowel

Coloured render with different shades-for external walls-Arkan 220:

Premixed pigmented render consisting of white Portland cement, hydrated lime, inorganic pigments, polymer additives and processed marble aggregate (1.25mm). Applied with machine on masonry and concrete background. Finishing coat plaster for ceilings and rough plaster surfaces in thin coat Applied on in 3-5 mm thickness Can be sprayed with plastering machine or applied manually Easy to work with trowel Compressive strength 4-5 N/mm2.

Heritage plaster for special uses – Arkan 225:

Premixed pigmented render consisting of white Portland cement, hydrated lime, inorganic pigments polymer additives and processed marble aggregate (2.4mm). Applied with machine or by hand on masonry and concrete background. Suitable for landscaping in gardens, waterfronts, parks etc. Suitable for carving by hand tools Applied direct on masonry surface by machine or by hand Can be applied in variable thickness in multiple coats Gives natural rock, stone finish Compressive strength 15 N/mm2.

Skim coat plaster (under 2 mm thick)- Arkan-230:

Premixed fine powdered form finishing plaster consisting of white Portland cement, white limestone and performance enhancing additives. 40 kg paper bag Applied by trowel on cement and gypsum plaster surface for smoothening the walls before painting. Applied in maximum thickness of 2 mm in single or double coat Long open time and working time Smooth white finish Bond strength Min 0.5N/mm2 .

Gypsum plaster for internal walls- Arkan 250:

Premixed plaster consisting of hemi-hydrated gypsum, hydrated lime, polymer additives and processed mineral aggregate (0.5mm). Applied with machine on interior walls and ceilings. Smooth finish plaster for internal walls and ceilings One coat application in 10-20 mm on prepared surface No water curing required Provides cooling effect Compressive strength 2-5 N/mm2.

Light weight gypsum plaster for internal walls- Arkan 255:

Premixed plaster consisting of hemi-hydrated gypsum, hydrated lime, perlite, polymer additives and processed mineral aggregate (0.5mm). Applied with machine on interior walls and ceilings. Light weight and smooth finish plaster for internal walls and ceilings One coat application in 10-20 mm on prepared surface No water curing required Provides cooling effect Better thermal insulation and fire retardant properties Compressive strength 2-5 N/mm2.

Gypsum veneer plaster for ceilings- Arkan 260

Premixed smoothening plaster consisting of hemi-hydrated gypsum hydrated lime, polymer additives and processed mineral aggregate (0.5mm). Thin coat finishing plaster, applied in 3-5 mm thickness on prepared surface of plaster and concrete. No water curing Applied by machine or by hand Compressive strength 2-5 mm.

Acoustic plaster- Arkan 265:

It is a premixed, hemi hydrated gypsum and Perlite based lightweight and sound absorbing plaster for application on wall, soffits and ceilings. It is applied with spray technique to get a Tyrolean texture finish. It prevents echo in large domed area and halls by absorbing the sound waves of high intensity. Very good adhesion and other mechanical properties Applied in 10-12 mm thickness on prepared surface.

Key coat-Bonding compound for normal concrete – Arkan 300

Dry mix bonding compound consisting of OPC, polymer additives and processed mineral aggregate (2.4mm). Applied on concrete surface to achieve mechanical key for plastering. Bonding key coat for normal concrete surface. Provides rough textured surface for plastering application Eliminates hacking of concrete Applied in 2-4 mm thickness Bond strength Min1.0 N/mm2.

Key coat -Bonding compound for ultra-smooth concrete –Arkan 310

Dry mix bonding compound consisting of OPC, polymer additives and processed mineral aggregate (2.0mm). Applied on densified smooth concrete surface and AAC blocks to achieve mechanical key for plastering. Bonding key coat for ultra-smooth concrete surface and AAC blocks. Provides rough textured surface for plastering Eliminates hacking of concrete Applied in 2-4 mm thickness Bond strength Min1.25 N/mm2.

Masonry mortar for normal concrete block – Arkan 350

Premixed masonry mortar consisting of OPC, polymer additives and processed mineral aggregate (2.4mm). Applied with trowel to fix normal concrete blocks. Masonry mortar for laying/ fixing all types of concrete blocks Excellent troweling properties Compressive strength 8-10 N/mm2.

Masonry mortar for AAC lightweight concrete block- Arkan 360

Premixed thin bed adhesive mortar consisting of OPC, hydrated lime, polymer additives and processed mineral aggregate (0.5mm). Applied with combing trowel to fix AAC blocks. Adhesive mortar for AAC lightweight blocks. Thin bed mortar applied in 3-5 mm thick by notched trowel. Excellent adhesion on smooth and porous AAC blocks.
Compressive strength 8-10 N/mm2.